12.500-13.500 pcs/hour 10 Glass Water Thermoforming Machine

10-cavity mold machine, with a production capacity of 13,500 glasses per hour, produces 3 different glasses with the same mold and Bottom Height Adjustment in volumes such as 150 ml, 200 ml, 250 ml.

General Structure:

Machine operation order:

• 100 cm diameter. Lower bobbin feeding unit

• 4 Pitch heating unit

• Air Pressure Control and Circuit breaker system

• Plexiglass doors

• PNEUMATIC Movable CORE unit

• PNEUMATIC Movable SCISSORS System Forming station

• Top foil holder with Air Shaft and Heated tensioning system

• Photocell System

• PNEUMATIC Movable SCISSORS System Gluing station

• Upper Pressure Piston reinforced Bonding Unit

• SERVO Moving

• Reducer driven Connecting rod pusher cutting unit

• Lubrication inlets on column shafts and bearings

• Top foil waste wrapping unit

• interior lighting

• Bottom foil wastage Cutting unit

• In-Cutting Conveyor

• Pneumatic valves and Pistons are FESTO -SMC -MIDMAN -PNÖMAX.

• PLC system is OMRON-SIEMENS-VEICHI.

• The Control Screen will be with 10” COLOUR TOUCHSCREEN.

• Servo and Driver Equipment (OMRON-VEICHI)

• All contactors and motor protections to be used will be Siemens or Telemecanique.

• Stainless tank for internal air balance is standard on the machine.

• 7075 Aluminum and 304 on the machine

  Glass Water Machine Energy Consumption:
  Electricity: 15 KW/hour at first start, 7.5 KW/hour in standard operation
  Air: 6—8 Bar. 2.5 m³/min