500 Kg 32 No 100 mm Et Kıyma Makinası

Product Advantages;

• The machine is designed for the first time by our company in compliance with CE standards taking into account hygiene and human health. The gearbox body is aluminum die-cast. The gearbox front cover is used as a peak casting to prevent the oxidation of the felt bearing.

• The machine has a 2.2 Kw 3 Hp single-phase motor.

• Capacity; when used with a 4.5 mm mirror, 600 Kg/h

• 304 quality stainless steel sheet is used in the top tray ( meat loading hopper ) and body of the machine.

• There is a stainless steel hand protection device made of 304 quality stainless steel on the top tray of the machine.

• Heat insulating insulation is applied to the underside of the top tray.

• The edges of the top tray are designed as oval to avoid bacteria.

• The machine’s casing ( meat outlet hopper ), helix ( screw or ball ), ring ( nut ), and meat inlet throat are made of 304 quality stainless steel casting.

• 2 pieces of M16 stainless bolts and 2 pieces of M16 front surface closed stainless cap nuts are used for the meat outlet hopper to be easily removed and installed.

• The meat outlet hopper of the machine is easy to remove and install for cleaning and hygiene.

• There is a stainless steel casting wrench in the machine to loosen the ring ( nut ) and also to remove and install the meat outlet hopper.

• A carrying handle is attached to the rear cover for easy transportation of the machine.

• 2 ( two ) contractors are used as motor protection in the machine.

• There is an emergency stop button for forward – reverse – stop and emergency situations in the machine.

• Stainless mirror and blade are used in the machine.

• All connections and equipment of the meat and meat processing units in the machine are made of 304 quality stainless steel casting.

• There is a protective housing wire on the bottom surface of the machine to prevent unwanted pests from entering.

• The machine has an oil and flame-resistant electrical cable.

• There is a cooling system in the machine to prevent browning and odor formation of the minced meat.

• A 1/6 hp ecovat is used in the machine.

• R134a (OZON AND ENVIRONMENTALLY FRIENDLY) liquid gas is used in the machine.

• There are 2 air intake fans in the machine to transfer heat outside.

• There is a cooling automatic in the machine for adjusting the cooling degree.