Mekanik Çivi Tabancası Beton Ve Çelik Çivi Tabancası Zımba Perçin Tabancası

The wall planing machine has good sound insulation. Reduces noise, is safer. The reinforced and thickened alloy steel firing pin supports the assembly of nozzles of different sizes, making it suitable for stapling different sizes of rebar. The removable design of the handle allows it to be attached to an extension rod. can be done without climbing.

This portable nail gun is only 33 cm in length, has a caliber of 7.3 mm, weighs less than 1 kg, and can be used with one hand. Meanwhile, this steel nail wall fixing tool adopts a small alloy steel head design that is suitable for 16 slots, 20 slots, and row slots, with a strong drilling force. It takes only 0.1 seconds to drill a 3 mm steel plate with the concrete tool.

Convenient shape, smooth operation, easy to move to different scenes. Due to its unique technology, there is no need to carry additional energy or gas cylinders, including power sources. The roof nail gun is suitable for camera installation, electrical box installation, water and electrical installations, hanging picture frames, multi-functional shelves, small junction boxes, pipeline installations, wire binding, etc.

Technical Specifications

Type: Nail Guns and Riveters
Size: 33cm
Weight: 1kg
Parts: 1 machine box, 1 body, additional parts

Features

• 5 Speed Settings: The 5-level force control can be adjusted to meet different design requirements. It is suitable for low speed soft surfaces, high-speed high penetration, and high-hardness surfaces.

• Lightweight Design: This mini nail gun is only 33 cm long, has a caliber of 7.3 mm, weighs less than 1 kg, and can be used with one hand. Convenient shape, smooth operation, easy to move to different scenes. Due to its unique technology, there is no need to carry additional energy or gas bottles.

• Small Head Design: This steel nail wall fixing tool adopts a small head design made of alloy steel, suitable for 16 slots, 20 slots, and row slots. The reinforced and thickened alloy steel firing pin supports the assembly of nozzles of different sizes, making it suitable for stapling different sizes of rebar. The removable handle design allows it to be attached to an extension rod. Can be done without climbing.

• Wide Applications: With strong penetration force, the concrete tool can drill a 3mm steel plate in just 0.1 seconds. Suitable for camera installation, electrical box installation, water and electrical installations, hanging picture frames, multi-functional shelves, small junction boxes, pipeline installations, wire bundling, etc.

Usage:

1. Remove the nail gun head, attach the connecting rod to the desired height, and attach it to the dust collector.

2. Remove the used nails, tilt the nail gun upward at a 45-degree angle (it is strictly forbidden for the machine mouth to face people), and insert the nails. When loading the nails, the nail tip should be facing outward and make sure the nails are mounted to the specified depth (based on the fact that the back end of the nail is 42 inches away from the Gun body is completely buried).

3. Press firmly toward the nailing position, hold the rod vertically, and push the nail vertically to nail.

4. After nailing is completed, tilt the machine head 45 degrees upward and retract the nail (it is strictly forbidden to use the machine mouth towards people).

Maintenance:

1. Tighten around 100 times, after striking it, use a tool to remove the muffler sleeve and perform residue cleaning.

2. Standard maintenance cycle: after about 200 strikes, loosen the holder, use a tool to clean and wipe residues from each part.

3. After each working day (regardless of whether the maintenance cycle is reached), perform the “Loosening and assembly” procedure and clean the inner and outer parts of the holder for maintenance.

4. If it is found that the movement of the movable arm of the nail fixing device is not flexible or disturbing during use, the components should be checked for damage. If damage is found, it must be replaced in time. Damaged parts cannot be reloaded on the nail fixing device for further use to prevent work safety accidents or damage to other parts. When the gun body overheats excessively and affects grip and use, it should be temporarily suspended and cooled before use.