4-10 Mm Diameter 2400 Mm Wire Mesh Welding Machine

2400 Mm Wire Mesh Welding Machine 4-10 mm diameter

MESHMATIC S SERIES HKM24S10

MESHMATIC S SERIES HKM24S10 Technical Specifications

Capacity:

Machine speed: 70 strokes / minute

Wire Mesh Width: 2400mm

Mesh Length: 6000mm

The bar diameter is 4-10mm

Length bar diameter 4-10mm

Max eye pitch 50-300mm (from operator panel)

Length bar range: 75-1mm with manual adjustment

Machine Components

1) LENGTH BAR SLIDING MECHANISM

2)WELDING UNIT

3) THROW THE TOP STICK

4) MESH DRAWING

5) MATTRESS THROWING

6) AUTOMATION PANEL

1) The length bars placed in the channels are fed into the machine by a trolley.

It is possible to enter 24 height bars.

When welding 8mm, a maximum of 18 rods are entered.

rods nozzles centers

2) It consists of lower electrode, upper electrode and 9 transformers of 120 KVA.

The length rods coming from the sliding unit and the width rods coming from the throwing unit are held together by the magneto and the welding pistons are held together by the rod.

It is compressed and welded with the energy coming from the transformer.

3) The magnetic bar takes some width bar from the width bar warehouse and drops it into the servo motor chamber.

Servo motor takes the rods one by one and gives them to the throwing unit.

Ejection is done with pistons.

He throws his rod towards the magneto.

4) The mesh pulling system is carried out by a trolley walking on a servo motor controlled liner slide.

The pliers grab the wicker at its bar and pull it step by step.

6) There are 9 800Amp disc thyristor welding units inside the panel.

PLC and motor control systems are compatible with each other.