350+350 Kg Shock Cooling and Resting and Powder Drying Oven

DIGITAL THERMOSTAT POWDER DRYING OVEN (WITH WHEELS)

The main working principle is to keep factory output welding powders at high temperature for shock and to preserve them by resting at a low temperature until they are taken to the application point.

Factory output welding powders will be shocked by being kept at 300°C-350°C for about 2 hours during the first use and will be left to rest at 130 °C. After the drying process, the powders should be taken into buckets with a bottom discharge system and brought to the application point as soon as possible.

IT CONSISTS OF TWO SEPARATE SECTIONS THAT CAN BE CONTROLLED SEPARATELY. WHILE ONE SIDE IS RESTING AT 130 DEGREES, THE OTHER SIDE CAN BE SHOCKED AT 350 DEGREES. THE TOTAL CAPACITY IS 250 KG. NEW POWDER CANNOT BE ADDED UNTIL THE PROCESS OF MOIST POWDERS THAT HAVE NOT BEEN FULLY SHOCKED UNDER NORMAL CONDITIONS IS COMPLETED. IN THIS OVEN, WHILE MOIST POWDERS ARE SHOCKED ON ONE SIDE, YOU CAN TAKE AS MUCH AS YOU NEED FROM THE OTHER SIDE AND LEAVE THE REMAINING TO REST. BOTH SIDES CAN BE ADJUSTED TO THE DESIRED TEMPERATURE BETWEEN 0-400 DEGREES.