Resin System Building Exterior Cleaning Machine

Stopp Resin System

Resin System Building Exterior Cleaning Machine

Resin System Building Exterior Cleaning Machine is TSE and LOCAL PRODUCT CERTIFIED

OUR MACHINES ARE MANUFACTURED ACCORDING TO TSE K579 STANDARDS

OUR MACHINE HAS A LOCAL PRODUCT CERTIFICATE AND CAN BE INSTALLED WITH A 1 YEAR INTEREST-FREE INSTALLMENT PLAN WITH INFLATION + 2% INTEREST RATE THROUGH STATE BANKS’ ACCELERATION LOAN.

STOPP-RÇ ( Resin System)  Exterior Cleaning Machine 

STOPP-RÇ is a lightweight service-type machine designed for simple and easy use and operation.

STOPP-RÇ Exterior Cleaning Machine operates by deionizing water through resin with the pressure of the mains water.

This machine is designed to provide economic cleaning solutions for businesses that want to perform their own washing tasks and for companies providing exterior cleaning services.

Glass surfaces cleaned with detergent are rinsed with deionized water and left to dry.

Glass surfaces dry on their own without the need for a special drying process. Dried surfaces are delivered spotless and clean.

STOPP-RÇ Exterior Cleaning Machine can work safely up to 21 m without the need for crane, elevator, or scaffolding installation, using GARDINER brand extension pipes that are both lightweight and sturdy, with a very low elongation rate as the length increases, produced solely for this purpose.

Since there is no filter in the resin system, issues like drying do not occur.

Consumable materials (resin + detergent) cost is related to the quality of mains water and is estimated to be around 100 TL/day according to Ankara water values.

STOPP Resin Exterior Cleaning Machine Technical Specifications:

• Mobile deionized system that does not require maintenance

• Operation with electricity and water pressure

• Detergent dosing system that is not negatively affected by electric adjustable water pressure and acidic products used to remove limescale, capable of pumping detergent up to 100 meters if necessary.

• Separation system of deionized and mains water for cleaning exterior coatings and/or glass surfaces

• 50 m PE water hose with a single 8 mm diameter between the machine and the brush

• 180-degree adjustable brush head between the pipe and the brush, and additionally optional extensions for the brush head, corner cleaning, and side attachments that provide mechanical force for stains or dirt that cannot be removed from glass or composite surfaces.

• TDS meter to track resin changes.

• 25 liters of resin (can work for a minimum of 10 days depending on mains water quality)

• 10 liters of glass cleaning detergent

• The machine’s weight and dimensions allow it to be easily transported with a small commercial vehicle  

• Water pressure gauge  

(Note: It is recommended to transport the machine vertically inside the vehicle!)