Rivet Hammer Machine

Rivet Hammer Machine

Kanmak KM 400 P

Kanmak Machine KM 400 P Model works with 220 volts electricity.

It has an electronic controlled command system.

The machine operates with a pressing technique.

The workpiece is placed in the lower and upper chambers of the machine, and the snap fasteners are pressed through the pedal using the machine’s pressure power.

Our KM 400 P rivet hammer machine is completely locally produced.

In terms of functionality, our KM 400P machine is guaranteed for two years against manufacturing defects.

Our machine operates with a shock system.

The body is made of cast iron. The coil used in the bobbin is made of copper wire and weighs 2 kg. The shaft system is stainless.

The bushing system consists of red bushings used in vehicle starter motors. This bushing system has a self-lubricating feature.

These are our biggest differences from our competitors as Kanmak Machine.

You can change the impact power from the electronic card of our machine according to the accessory you will use.

Our machine is suitable for all RIVET hammering jobs used in textiles.

By changing the mold, it can also be used for eyelet hammering jobs.

Rivet hammering on pants, pressing on all types of fabrics, tarpaulin-like materials, button pressing in confectionery products, pressing on children’s clothing, and all types of leather belts, shoes, etc.

In manufacturing, it can be used for pressing trop decorations, pant hooks, or any type of hook pressing, skirt hooks, and all accessories with suitable mold selections.

It is suitable for use in car covers, shoes, bags, leather belts, hats, tarpaulin, and advertising in the automotive sector.

It can be adjusted for use according to the molds suitable for the work to be done in these sectors.

Boot Hook – Drilling and Cutting Jobs can be done with special molds.

Kanmak Machine KM 400 P Technical Specifications

– Works with single-phase (220V) electricity.   – Can make EIGHT THOUSAND – TEN THOUSAND strokes daily.

– At most, it makes 1 stroke in 1 second.   – It is a very fast working machine.  

– The body is cast.   – The coil is copper.   – Foot profile.   – Cooling system.

– It can hit 1300 kg per square meter.  

– Laser marking and a sensor to prevent pressing when the hand is visible can be optionally installed.

– The impact power is adjusted with numbers from the electronic card (0-99).

– Our machine’s electronic card has a counter that counts the number of pieces pressed.

Kanmak Machine KM 400 P Features

– BUTTON – RIVET – RIVET- EYELET – SNAP- CLIP

– HOOK- TROP- CLIP

– Can press PANT AND BOOT HOOKS.

– Can drill.

Kanmak Machine manufactures accessory pressing machines.

Prices include VAT.