SS Binder İzolasyon Astarı

15 Litre SS Binder Insulation Primer

Product Description: It is an acrylic emulsion-based primer. It is applied before plaster and cement-based mortar applications on raw concrete walls, columns, and ceilings. It is an easy-to-apply interior and exterior primer that prevents the rapid water loss of plaster and especially plaster-based mortars, enhancing their adhesion to raw concrete surfaces.

Usage Area: It is used in interior and exterior spaces, on raw concrete walls and ceilings to enhance the adhesion of all plaster and mortars to raw concrete, preventing the rapid water loss of cement and especially plaster-based mortars, with or without machine application. With its silicone content, it reduces the surface's water absorption capacity and increases vapor permeability. It is not recommended for flat paint applications.

Application Method: Any kind of oil, grease, rust, and paraffin residues that will weaken the surface adhesion should be removed, the surface should be firm, dry, and free of loose particles. Depending on the desired consistency, mix it with 15-25% water, stir for 3-5 minutes until a homogeneous and lump-free mixture is obtained, and apply a single coat to the previously prepared surface with an exterior paint roller. The product should be mixed at regular intervals during application. The surface must be completely dry before plaster and mortar application (approximately 24 hours).

Points to Consider During Application:

• Before use, the paint should be stirred until homogeneous inside the can.

• Surface problems may occur in environments below +5°C and above +35°C during application.

• The surface must be completely dry before plaster and mortar application (approximately 24 hours).

• The product should be mixed at regular intervals during application.

• Application surfaces should be dry and clean.

• Application should be done according to the specified application characteristics.

• The product should be mixed at regular intervals during application.