Switch Mode Su Soğutmalı Kaplama Redresörü

Redarti Water Cooled Rectifier

Microprocessor-controlled thyristor-based rectifiers are full automatic power sources used to provide direct current required in processes such as coating, painting, anodizing applied on metals and plastics in industry through electrolysis. Thyristor control, controlled by microprocessor, provides high accuracy and precise regulation, resulting in high quality outcomes in the process where it is used. One of the most important features of thyristor-controlled systems is the Pulse-Base current control. In coatings realized with the Pulse-Base method, the coating reaches the most hidden corners no matter how intricate the shape of the parts is. The problem of missing coating observed in challenging areas vanishes. The general coating distribution on the part is more proportional and saves time. Coating processes carried out using 600Hz and Pulse-Base method offer a quality far beyond traditional methods in every aspect.

Redarti Water Cooled Rectifier Technical Information

The new AC Drive Unit of REDARTI Coating rectifiers have been equipped with the new AC power control unit. Thanks to this unit, rectifier failures decrease while operational efficiency and rectifier functions are enhanced. With the new AC drive unit, failures are prevented without damage. Thus, it can be used safely even in the toughest conditions. The new Drive system has the ability to operate both from the remote control unit and the automation system at the same time. Besides the many ready features, it is open to additional features to be added over time. With the timer in the Operation Program, operation is ensured at the desired duration or indefinitely. In timed operation, the rectifier operates at desired values and automatically stops at the end of the time. It warns the user at the end of the process. In continuous operation, the operation continues until the user stops the device. Amperage and Automatic Dosing REDARTI Coating rectifiers have Amperage calculation feature. This provides the most reliable data on the total operation process of the bath. The coating process can be operated according to the amperage value instead of time. There are different counters on the operator panel for both the ongoing coating process and the total operations. These counters can be used to automatically add chemicals to the bath. Especially in critical baths, chemical concentration control is extremely important. REDARTI rectifiers assist you in chemical control with this feature. It also provides important data about the total operation and efficiency of the system. Selective Operation Program In many coating baths, a selective operation program is applied to remove unwanted metals from the bath. However, this process was carried out manually or with an external system. In the selective operation program offered in REDARTI coating rectifiers, this process is done automatically. After the operation starts, the output voltage is increased to zero at the set interval and then returns to zero. This process is repeated periodically or indefinitely. Thus, the laborious maintenance process of selective operation is easily carried out. Easy to Use REDARTI Standard Coating rectifiers have an extremely simple operating program. Thanks to the remote control unit, the operator can easily operate the device without going to the rectifier. The system is fully compatible with all automation systems. It has both manual and automatic operation capabilities.