2490 mm Chassis Bone Saw without Brake

2490 mm Chassis Brakeless Bone Saw
 

Product Advantages;

• Motor power            : 1.5 Kw  2 Hp 400Volt 50 Hz.

• Width                          : 1000mm

• Length                        : 1020mm

• Height               : 1800 mm

• Net Weight             : 160 Kg

• Table dimensions        : 800×760 mm

• Cutting height  : 0-310 mm

• Cutting width     : 0-290 mm

• Band saw diameter      :2490 mm

• Pulley diameter          :314mm

• The machine is manufactured as chassised.

•  Imported steel band saw is used in the machine.

• There is a cutting thickness adjustment on the saw.

• The product has a pusher device for safety.

• The pusher device is made of 304 quality stainless steel.

• The outer body of the machine, front cover, meat cutting table lower chassis table and motor protection plate are made of 304 quality stainless steel.

• There is a 304 quality stainless chip box at the bottom chassis.

• Upper pulley bearing system: A hanging system where the upper pulley that can move on 2 stainless steel shafts is attached. In the floating bearing system where the upper pulley is attached, the main bearings are made of spheroidal cast iron and are designed to move on 2 stainless steel shafts.

• Band saw tensioning system: There is a special design locking tensioning system that prevents the band saw from breaking during tensioning.

• Upper pulley adjustment: There is an angle adjustment screw on the outer surface of the body where the angle adjustment of the upper pulley can be easily made.

• There is 1 movement button, 1 stop button and 1 emergency stop button on the front upper body of the machine.

• When the front cover of the machine is opened, there is 1 sensor that cuts off the electrical circuit to prevent the machine from operating.

• There are 2 rotary locking systems in the front cover locking system of the machine.

• There is a movable work table that allows you to push the meat on the machine

• Work table: Made of 304 quality stainless steel sheet with a thickness of 2.5 mm and dimensions of 800×760.

• The machine has a 1.5KW 2 HP 50HZ 400VOLT electric motor.

• There is a hand protection device used during meat cutting in the machine.

• The machine is produced as a three-phase motor.